Wing Fender

Wing Fenders are developed on the basis of D Fenders. They can be fixed with double line anchors which greatly increase the installation stability. Furthermore, their anchoring bolt is bigger than D Fender so that the anchoring grip is double to D Fender.

JIER Wing Fender

JIER Wing Fender

Usually wing fenders are used as an alternative to other profiles as beltings for tugs and workboats. Instead of drilling the fender, the wings of wing fender are retained by steel angles.

Wing Fenders are friendly to installation. They are forcibly jacked into the angles during installation and joints between adjacent sections are “plugged” to achieve a smooth and continuous contact face. Once fitted, the “wings” of the wing fender sit tightly within the angles making this arrangement very resistant to longitudinal and transverse shear. Due to that, the wing fender is ideal for tugs performing escort duties and similar applications.

CORE ATTRIBUTES

⇒ The reaction force and energy absorption of wing fender are higher than D fender
⇒ Compact size and expedient installation due to the “wing” design
⇒ JDO Wing Fender enlarge fender bottom width and pre-built-in steel plate mount.
⇒ Particularly applicable for framework quay, in addition the wing fender can be arranged and used with other types of rubber fender.

 

[top]

Contact Us

Feel free to contact us if you have any comments or inquires and one of our skilled staff representatives will contact you within the next business day.

  • 1 + 80 =

Wing Type Marine Rubber Fender Specification

JIER Wing Fender Specification

Size

Dimensions (mm)

H

B

b

L

Q

p

s

h

T

t

K

n

JDO280H x 540 x 1000L

280

540

430

1000

150

700

165

120

82

41

40

2

JDO280H x 540 x 1500L

280

540

430

1500

150

600

165

120

82

41

40

3

JDO280H x 540 x 2000L

280

540

430

2000

145

570

165

120

82

41

40

4

JDO280H x 540 x 2500L

280

540

430

2500

150

550

165

120

82

41

40

5

JDO280H x 540 x 3000L

280

540

430

3000

150

540

165

120

82

41

40

6

JDO300H x 600 x 1000L

300

600

490

1000

150

700

165

120

82

41

40

2

JDO300H x 600 x 1500L

300

600

490

1500

150

600

165

120

82

41

40

3

JDO300H x 600 x 2000L

300

600

490

2000

145

570

165

120

82

41

40

4

JDO300H x 600 x 2500L

300

600

490

2500

150

550

165

120

82

41

40

5

JDO300H x 600 x 3000L

300

600

490

3000

150

540

165

120

82

41

40

6

  • Download PDF FileJIER Wing Fender

Related Products

D Fender
D Fender
D Fenders can be pre-curved, chamfered and drilled to aid installation at a relatively low cost and can also be cut to the length required ...
Keyhole Fender
Keyhole Fender
Keyhole Fenders are made of high abrasion resistance rubber. They are specially designed for tugboats and workboats.
Rubber Pads
Rubber Pads
Rubber Pads (Plates) are designed and produced for the protection of barges, tugboats, water locks and quay walls.
Square Fender
Square Fender
Square Rubber Fenders offer similar advantages to D fenders and are typically used where a stiffer fender is required. Square Rubber Fenders...