Chains and Fittings

Mooring Bollards
Mooring Bollards
In the maritime contexts in which the term originates, a bollard is either a wooden or iron post found as a deck-fitting on a ship or boat, and used to...
Mooring Ropes
Mooring Ropes
Natural fibre ropes used to be the choice of impoverished sailors, but so little is made that it is now more expensive. It is hard, therefore, to justify...
Chains
Chains
Chains are used for two reasons – to suspend/support the fender or to control the deflection geometry during horizontal ...
Shackles
Shackles
Shackles and other accessories are all referenced to the nominal chain diameter for equivalent strength and typically of larger diameter material.
U Anchors
U Anchors
U Anchor is an main accessory in marine rubber fender system. It is used to hold chains.
Bolts and Nuts
Bolts and Nuts
Bolts, Nuts and Washers are a set of fasten fittings. They are used as joint part between fender body and dock, steel panels and fender body, UHMW-PE facing pads and steel panels. Usually these fasten fittings are made of stainless steel, Q235 Hot galvanized.